LIUGONG 2Ton CLG820C Wheel Loader

Introduction:

Turbo air filter removes over 90% of dust and impurities, reducing engine wear and fuel consumption extending engine service life and improving engine efficiency.
Radiator fan is directly engine driven and provides strong efficient cooling.
38 degree angle of articulation for working in tight spaces.
Low fuel consumption engine that doesn’t sacrifice any power.
Very low cycle time of 8.6 second, great for efficient for smooth strong gear changes.
Meets EU stage IIIA/EPA tier 3 emission requirements.

Inquiry

Product Detail

Product Tags

Easy to Maintain

Hydraulic system easily checked after removing front cover.
Easy engine access, convenient placement of key parts and fluid refill points.

Always Reliable

Power cut-off function prevents damage to drive components.
Double sealed O-rings brand new in Hydraulic system.
Stress analysis tested to strengthen weak points.

Parameter

Model		820C Wheel Loader
Bucker performance		1.0 m³
Operating weight		6,400 kg
Engine	emission regulation	Tier 2 / Stage II
	make	YT4B4-24
	gross power	65 kW (87 hp) @ 2,400 rpm
	net power	60 kW (80 hp) @ 2,400 rpm
	peak torque	305 N·m @ 1,600 rpm
	displacement	9.7L
	number of cylinders	4
	aspiration	natural
Transmission	Transmission Type	counter shaft-type power shift
	Torque Converter	3 element-single stage,single phase
	Maximum Travl Speed.fwd	25km/h
	Maximum Travl Speed.rev	25km/h
	number of Speed.fwd	2
	number of Speed.rev	2
Brakes	Service Breake Type	caliper dry disc
	Service Breake Actuation	hydraulic
	Parking Brake Type	shoe/drum
	Parking Brake Actuation	mechanical
Hydraulic system	Main pump Type	gear
	Main Relief Pressure	18Mpa
	Raise	5.2 s
	Dump Time	1.2s
	Float Down Time	3s
	Fastest Total Cycel Time	9.40 s
Loader arm performance	Tipping load-straight	4,997 kg
	Tipping load-Full Turn	4,487 kg
	Bucket Breakout Force	56 kN
	Maximum Dump Angle at Full Height	45±1 °
	Dump Clearance at full height discharge	2,856 mm
	Dump reach at full height discharge	769 mm
	Maximum hinge pin height	3,608 mm
	Maximum Digging depth,Bucket level	23 mm
	Bucket rollback at ground level	45°
	Bucket rollback at carry	49°
	Bucket rollback at maximum height	61°
Dimensions	Length with bucket down	6,125 mm
	width over tires	1904mm
	wheelbase	2,310 mm
	wheel Tread	1520mm
	Ground Clearance	285mm
	Turn Angle,Either Side	38°
	Rear Angle of Departure	28.5°
	Turning Radius,Outside of Tire	4,347 mm
	Turning Radius,Center of Tire	4,119 mm
	Turning Radius,Bucket Carry	4,979 mm
Service Capacities	FuelTank	95L
	Engine Oil	16L
	Cooling System	21L
	Hydraulic Reservoir	78L
	Transmission and Torque Converter	20L
	Axles,each	12 L